Vortec 1600 propane manual

An iron block is used for strength and durability. The Vortec also features a distributorless ignition system which reduces maintenance and increases reliability.

The entire engine will be backed by the GM Service Parts organization. The engine has a long history of refinements and has proven to be a value leader for General Motors. Home Power Generation Residential standby power is one application anticipated for the Vortec Many homeowners are now purchasing standby power generators for which the Vortec is well suited.

The mixer was swapped with a good running truck and the engine runs a few seconds then backfires. If I install the mixer from the faulty truck onto to good truck, it wont run. I need a new mixer for sure but the engine still has a miss and backfires. Possible blockage Posted 14 Oct Reply by snowmonkey Alberta, Canada. Read more Submit your article. Read all this week's news. Upcoming Events Submit your event. IntraLogisteX March 29 - 30, - Coventry, United Kingdom.

May 31 - June 2 - Manama, Bahrain. July 25 , - Bangkok, Thailand. More Events. Forklift Technician. Forklift Road Tech. Next Editorial Features 1. Ask us about editorial contribution. Latest Jobs Sales Coordinator. Sales Coordinator.

Email Address. Remember me. Forgot your password? Not a member yet? Register here. Your browser is out of date! This website is best viewed in Internet Explorer 10 or above. Please update your browser to view this website correctly. Press the Measure button to toggle between the Yards and Meters display.

Press the Menu button to save your desired choice and move to the Brightness selection screen. The Ranger provides three illumination settings. Press the Measure button to toggle through the three Brightness settings. To exit Mode Selection and save settings, press and hold the Menu button for four seconds.

Settings will also save when Ranger powers down automatically. With the Ranger powered up, position the crosshair on the target object and press and release the Measure button to get the distance measurement. If the laser is not able to range due to the reflectivity of the target, you will see a display similar to that shown here. To range a new target, simply reaim and press the Measure button again.

With the Ranger powered up, activate Scan Ranging by pressing and holding the Measure button down. Keeping the button depressed will continuously measure distance as you pan the crosshair back and forth across target objects. Releasing the Measure button will return laser to the Power Up Condition. Both modes offer a Scan feature. The Ranger HCD range display is intended to be the primary mode—used for most all rifle and archery shooting conditions.

The yardage number displayed is the critical horizontal component distance. Note: See page 13 for method of reading slope degree in LOS mode. The displayed HCD yardage number is corrected for shot angle and needs no extra user input; shooters simply use the appropriate level ground bullet drop and wind adjustment for the range displayed and shoot.

Archers use the appropriate level ground sight pin for the range displayed and shoot. The Ranger LOS Line of Sight mode is intended for rifle shooters who are using slope correcting ballistic drop data cards, ballistic cell phone applications, or PDAs with ballistic programs and who are shooting at distances beyond yards and with slopes greater than 15 degrees.

Most shooters and archers will not need the LOS mode. The range number displayed in LOS mode is the actual line of sight range with no ballistic correction for slope.

Most of the commonly used ballistic devices can provide independent slope correction for bullet drop data and require actual line of sight range input. To use, simply input the LOS range number into the electronic device or use the LOS range when referencing ballistic drop cards with slope correction. When in LOS mode, an additional number is displayed below the yardage number.